TuneBoss ECU 1.5.5 - App Store

TuneBoss ECU version 1.5.5

Updated At: 2026-10-14

Changes: Version History - Fix datalog data rate always writes 1hz rate - Fix fuel setting screen does not apply flash write - Fix issue where GPS will stop working if screen is turned off - Fix issue for IOS 26 cant share (platform error) - Add support for sidestand on Aveta Nova 250 - Reduce Gap Radiator Fan temperature setting from 5 to 3 - Add support for patch screen 1.5.5 Sep 24 - Add a clear Stages label on middle bottom nav bar logo - Revert/Fix TPS Calibration header that causing white screen after finish calibration 1.5.4 Aug 30 fix some flashing issue in tps calibration 1.5.3 Aug 26 - Reworked StayTuned - Added Light UI for tuning table (legacy app color scheme) - Improved Text visibility for tuning table - Fix cell value adjust bottom panel to be able to write even when opened state like before 1.5.2 Aug 20 - Fix Mode Corrupt when first created - Fix issue not able to share TBD file when in trip details - Added New Trip Detail screen - Added Fuel Settings screen - Update UI for shiftboss - Added Map file - Added Traction Control screen - Added more model for side stand support - Added Advanced TPS Acceleration - Improved Device info and warranty screen - Added new metermode analog skin - AFR and Injection Angle will now be available when StayTuned is active - Added Idle Control new group for idle 1.5.1 Aug 12 - Fix Stuck loading when wrong default password is used - Added ADV350 Meter Selection - Added scanner state on device list screen - Scanner on device list screen will automatically start after 10s cooldown 1.5.0 Jul 4 - Fix Stuck loading when wrong default password is used - Added ADV350 Meter Selection 1.4.9 Jun 11 - Added Auto Reconnect setting (experimental) - Prevent app crash if possible on communications failure - always reconnect on metermode (if auto reconnect enabled in settings) - Possible fix nav left/right stuck - do report to us if issue persist - Fix loading closed prematurely exposing start button before initial handshake with ecu - Y150zr v2 rename to Y15ZR 2019 - 2 cyl ecu stage 1 stuck when loading stage 2 mapping - fix download mapping froze on certain new model 1.4.8 Jun 6 - Fixed GPS duplicated instance - Added auto start stream to reconnect on metermode - Fix Mode Config loading - Fix Always on screen metermode - Added auto start diagnose on metermode - Fix infinite loading screens 1.4.7 May 26 Fix forza selection stuck Fix to Nav to first time TPS cal not working 1.4.6 May 15 - UI optimization - Enhanced UI state management - Added hyper fast reconnect - Fixed issue failed to update top speed on rankings - Fixed ble status shows ready even if bluetooth off - Fixed permission status shows denined when first-time installation - Update mode blocking duplicate modes - Update blocking swipe immediately after starting stream - Fixed issue failed to update top speed on rankings 1.4.5 May 8 - Added xmax, xmax v2, xmax v3 cross compatibility downloaded mapping - Added modenas and voge manufacturer - Added Avantis for sidestand menu - ShiftBoss - Stage 3 Min RPM - ShiftBoss - Advance QS - move ATAS setting to a new screen - auto connect to default ECU now checks for bluetooth readiness - Add auto connect to default ECU 1.4.4 Feb 19 - added last connected ECU - Fix issue with Gixxer 250 and VStrom 250's default radiator fan value - Update max radiator fan values - Minor UI changes on sidestand setting - Minor UI changes on reset factory setting 1.4.3 11/12/2025 - Added export to csv type for trips detail (datalog) - Added notification upon successfully activation sync - Move to new api for app version - Added new screen start fuel compensation 1.4.2 10/28/2025 - minor adjustment on password entry screen - fix some crashing issues on disconnect/reconnect - fix mode creation for first time will result in corrupted mode - added windshield control for xmax v3 1.4.1 10/02/2025 ECU 1.4.0 RC1 Changelog - reduce connection wait time 1.4.0 09/02/2025 - Fix language selection not sticking - GPS top speed filter gps glitch - Added play/pause on datalog viewer - Added more translation text - Update shiftboss min value when manual mode - Fixed bug on smooth shift stuck even after changing Shiftboss Mode - Added sync loss counter on diagnostic screen - Added Spark angle mini meter on pro adjustment table - Remove Dual injector from all dual cyl motor cycle - Ranking now supports Indonesian entry - Fix few issue with new api Ranking - Added XmaX v3 on supported bike - Fix issue with shiftlight immobilizer indicator got stuck if using 2 different phone - changed some reference to "device" to "phone" to remove ambiguity 1.3.9 08/16/2025 - add several failsafe layer for immobilizers to prevent getting stucked at always immobilized - Fix PWM mode radiator fan issue not applying cycle time properly - Fix increasing value check for 1D tables 1.3.8 06/17/2025 ECU 1.3.7 Changelog - add injector limit diagnostic description - remove ability to set mode if mode is not exist/created yet - add warning for staytuned screen - fix issue app crashing if start diagnose is turned on when staytuned is on tuning screen and navigates to adjust spark - fix locked tuner mode - swapping from locked and unlocked is currently not supported - when deleting mode file, make sure to clear mode's session value - auto create mode rumble - auto create mode antilag - added advance setting in tps calibration - remove code duplication for reading mapping file and applying map file (download and load mapping) - update some ui name for O2 Sensor default - update maxengine temp allowed for staytuned's - fix change password bug showing wrong current password 1.3.7 06/04/2025 - Fix issue when tuning > start diag will cause the app to hang/not responding/diag stop getting data from ECU - ranking UI fix for long ecu model name - fix locked table issue - enable spark tabs when staytuned is enabled - add info for user ecu is tuning piggy back style - add injector limit diagnostic - add injector limit indicator in tuning screen 1.3.6 05/09/2025 - fix issue loading map created in 1.3.3 failed - stayTuned improvement > enabled start diag to be able to see realtime tps/rpm and delta values adjusted in map tuning - stayTuned config screen improvement > enable few other settings 1.3.5 04/30/2025 - Migration update, some change may breaks, do inform our team if any issues. - fix bugs in 1.3.3 (applied to some yamaha models) - StayTuned improvements for more readibility 1.3.4 04/20/2025 Added support for MT25 2020 Added support for MT03 2020 Added support for R25 2020 Added support for R3 2020 1.3.3 04/07/2025 - fix bugs in 1.3.1 (some submenu not shown for certain ecu) 1.3.2 03/20/2025 - Fix issue with old mode returning misc3 unable to read for certain ECU - Removed 10 years Lucky Draw icon - Hide upgradables for stage 1 ECU - Adjustment for StayTuned enabled (showing delta instead of mapping values) - Add ecu region variable check (for permanent stage 1 indo ECU) - Fix UI issue when changing password (password updated, but notification failed to inform user) 1.3.1 03/17/2025

TuneBoss ECU version 1.5.5

Updated At: 2026-09-26

Changes: Version History - Fix datalog data rate always writes 1hz rate - Fix fuel setting screen does not apply flash write - Fix issue where GPS will stop working if screen is turned off - Fix issue for IOS 26 cant share (platform error) - Add support for sidestand on Aveta Nova 250 - Reduce Gap Radiator Fan temperature setting from 5 to 3 - Add support for patch screen 1.5.5 1d ago - Add a clear Stages label on middle bottom nav bar logo - Revert/Fix TPS Calibration header that causing white screen after finish calibration 1.5.4 Aug 30 fix some flashing issue in tps calibration 1.5.3 Aug 26 - Reworked StayTuned - Added Light UI for tuning table (legacy app color scheme) - Improved Text visibility for tuning table - Fix cell value adjust bottom panel to be able to write even when opened state like before 1.5.2 Aug 20 - Fix Mode Corrupt when first created - Fix issue not able to share TBD file when in trip details - Added New Trip Detail screen - Added Fuel Settings screen - Update UI for shiftboss - Added Map file - Added Traction Control screen - Added more model for side stand support - Added Advanced TPS Acceleration - Improved Device info and warranty screen - Added new metermode analog skin - AFR and Injection Angle will now be available when StayTuned is active - Added Idle Control new group for idle 1.5.1 Aug 12 - Fix Stuck loading when wrong default password is used - Added ADV350 Meter Selection - Added scanner state on device list screen - Scanner on device list screen will automatically start after 10s cooldown 1.5.0 Jul 4 - Fix Stuck loading when wrong default password is used - Added ADV350 Meter Selection 1.4.9 Jun 11 - Added Auto Reconnect setting (experimental) - Prevent app crash if possible on communications failure - always reconnect on metermode (if auto reconnect enabled in settings) - Possible fix nav left/right stuck - do report to us if issue persist - Fix loading closed prematurely exposing start button before initial handshake with ecu - Y150zr v2 rename to Y15ZR 2019 - 2 cyl ecu stage 1 stuck when loading stage 2 mapping - fix download mapping froze on certain new model 1.4.8 Jun 6 - Fixed GPS duplicated instance - Added auto start stream to reconnect on metermode - Fix Mode Config loading - Fix Always on screen metermode - Added auto start diagnose on metermode - Fix infinite loading screens 1.4.7 May 26 Fix forza selection stuck Fix to Nav to first time TPS cal not working 1.4.6 May 15 - UI optimization - Enhanced UI state management - Added hyper fast reconnect - Fixed issue failed to update top speed on rankings - Fixed ble status shows ready even if bluetooth off - Fixed permission status shows denined when first-time installation - Update mode blocking duplicate modes - Update blocking swipe immediately after starting stream - Fixed issue failed to update top speed on rankings 1.4.5 May 8 - Added xmax, xmax v2, xmax v3 cross compatibility downloaded mapping - Added modenas and voge manufacturer - Added Avantis for sidestand menu - ShiftBoss - Stage 3 Min RPM - ShiftBoss - Advance QS - move ATAS setting to a new screen - auto connect to default ECU now checks for bluetooth readiness - Add auto connect to default ECU 1.4.4 Feb 19 - added last connected ECU - Fix issue with Gixxer 250 and VStrom 250's default radiator fan value - Update max radiator fan values - Minor UI changes on sidestand setting - Minor UI changes on reset factory setting 1.4.3 11/12/2025 - Added export to csv type for trips detail (datalog) - Added notification upon successfully activation sync - Move to new api for app version - Added new screen start fuel compensation 1.4.2 10/28/2025 - minor adjustment on password entry screen - fix some crashing issues on disconnect/reconnect - fix mode creation for first time will result in corrupted mode - added windshield control for xmax v3 1.4.1 10/02/2025 ECU 1.4.0 RC1 Changelog - reduce connection wait time 1.4.0 09/02/2025 - Fix language selection not sticking - GPS top speed filter gps glitch - Added play/pause on datalog viewer - Added more translation text - Update shiftboss min value when manual mode - Fixed bug on smooth shift stuck even after changing Shiftboss Mode - Added sync loss counter on diagnostic screen - Added Spark angle mini meter on pro adjustment table - Remove Dual injector from all dual cyl motor cycle - Ranking now supports Indonesian entry - Fix few issue with new api Ranking - Added XmaX v3 on supported bike - Fix issue with shiftlight immobilizer indicator got stuck if using 2 different phone - changed some reference to "device" to "phone" to remove ambiguity 1.3.9 08/16/2025 - add several failsafe layer for immobilizers to prevent getting stucked at always immobilized - Fix PWM mode radiator fan issue not applying cycle time properly - Fix increasing value check for 1D tables 1.3.8 06/17/2025 ECU 1.3.7 Changelog - add injector limit diagnostic description - remove ability to set mode if mode is not exist/created yet - add warning for staytuned screen - fix issue app crashing if start diagnose is turned on when staytuned is on tuning screen and navigates to adjust spark - fix locked tuner mode - swapping from locked and unlocked is currently not supported - when deleting mode file, make sure to clear mode's session value - auto create mode rumble - auto create mode antilag - added advance setting in tps calibration - remove code duplication for reading mapping file and applying map file (download and load mapping) - update some ui name for O2 Sensor default - update maxengine temp allowed for staytuned's - fix change password bug showing wrong current password 1.3.7 06/04/2025 - Fix issue when tuning > start diag will cause the app to hang/not responding/diag stop getting data from ECU - ranking UI fix for long ecu model name - fix locked table issue - enable spark tabs when staytuned is enabled - add info for user ecu is tuning piggy back style - add injector limit diagnostic - add injector limit indicator in tuning screen 1.3.6 05/09/2025 - fix issue loading map created in 1.3.3 failed - stayTuned improvement > enabled start diag to be able to see realtime tps/rpm and delta values adjusted in map tuning - stayTuned config screen improvement > enable few other settings 1.3.5 04/30/2025 - Migration update, some change may breaks, do inform our team if any issues. - fix bugs in 1.3.3 (applied to some yamaha models) - StayTuned improvements for more readibility 1.3.4 04/20/2025 Added support for MT25 2020 Added support for MT03 2020 Added support for R25 2020 Added support for R3 2020 1.3.3 04/07/2025 - fix bugs in 1.3.1 (some submenu not shown for certain ecu) 1.3.2 03/20/2025 - Fix issue with old mode returning misc3 unable to read for certain ECU - Removed 10 years Lucky Draw icon - Hide upgradables for stage 1 ECU - Adjustment for StayTuned enabled (showing delta instead of mapping values) - Add ecu region variable check (for permanent stage 1 indo ECU) - Fix UI issue when changing password (password updated, but notification failed to inform user) 1.3.1 03/17/2025

TuneBoss ECU version 1.5.4

Updated At: 2026-09-19

Changes: Version History - Add a clear Stages label on middle bottom nav bar logo - Revert/Fix TPS Calibration header that causing white screen after finish calibration 1.5.4 Aug 30 fix some flashing issue in tps calibration 1.5.3 Aug 26 - Reworked StayTuned - Added Light UI for tuning table (legacy app color scheme) - Improved Text visibility for tuning table - Fix cell value adjust bottom panel to be able to write even when opened state like before 1.5.2 Aug 20 - Fix Mode Corrupt when first created - Fix issue not able to share TBD file when in trip details - Added New Trip Detail screen - Added Fuel Settings screen - Update UI for shiftboss - Added Map file - Added Traction Control screen - Added more model for side stand support - Added Advanced TPS Acceleration - Improved Device info and warranty screen - Added new metermode analog skin - AFR and Injection Angle will now be available when StayTuned is active - Added Idle Control new group for idle 1.5.1 Aug 12 - Fix Stuck loading when wrong default password is used - Added ADV350 Meter Selection - Added scanner state on device list screen - Scanner on device list screen will automatically start after 10s cooldown 1.5.0 Jul 4 - Fix Stuck loading when wrong default password is used - Added ADV350 Meter Selection 1.4.9 Jun 11 - Added Auto Reconnect setting (experimental) - Prevent app crash if possible on communications failure - always reconnect on metermode (if auto reconnect enabled in settings) - Possible fix nav left/right stuck - do report to us if issue persist - Fix loading closed prematurely exposing start button before initial handshake with ecu - Y150zr v2 rename to Y15ZR 2019 - 2 cyl ecu stage 1 stuck when loading stage 2 mapping - fix download mapping froze on certain new model 1.4.8 Jun 6 - Fixed GPS duplicated instance - Added auto start stream to reconnect on metermode - Fix Mode Config loading - Fix Always on screen metermode - Added auto start diagnose on metermode - Fix infinite loading screens 1.4.7 May 26 Fix forza selection stuck Fix to Nav to first time TPS cal not working 1.4.6 May 15 - UI optimization - Enhanced UI state management - Added hyper fast reconnect - Fixed issue failed to update top speed on rankings - Fixed ble status shows ready even if bluetooth off - Fixed permission status shows denined when first-time installation - Update mode blocking duplicate modes - Update blocking swipe immediately after starting stream - Fixed issue failed to update top speed on rankings 1.4.5 May 8 - Added xmax, xmax v2, xmax v3 cross compatibility downloaded mapping - Added modenas and voge manufacturer - Added Avantis for sidestand menu - ShiftBoss - Stage 3 Min RPM - ShiftBoss - Advance QS - move ATAS setting to a new screen - auto connect to default ECU now checks for bluetooth readiness - Add auto connect to default ECU 1.4.4 Feb 19 - added last connected ECU - Fix issue with Gixxer 250 and VStrom 250's default radiator fan value - Update max radiator fan values - Minor UI changes on sidestand setting - Minor UI changes on reset factory setting 1.4.3 11/12/2025 - Added export to csv type for trips detail (datalog) - Added notification upon successfully activation sync - Move to new api for app version - Added new screen start fuel compensation 1.4.2 10/28/2025 - minor adjustment on password entry screen - fix some crashing issues on disconnect/reconnect - fix mode creation for first time will result in corrupted mode - added windshield control for xmax v3 1.4.1 10/02/2025 ECU 1.4.0 RC1 Changelog - reduce connection wait time 1.4.0 09/02/2025 - Fix language selection not sticking - GPS top speed filter gps glitch - Added play/pause on datalog viewer - Added more translation text - Update shiftboss min value when manual mode - Fixed bug on smooth shift stuck even after changing Shiftboss Mode - Added sync loss counter on diagnostic screen - Added Spark angle mini meter on pro adjustment table - Remove Dual injector from all dual cyl motor cycle - Ranking now supports Indonesian entry - Fix few issue with new api Ranking - Added XmaX v3 on supported bike - Fix issue with shiftlight immobilizer indicator got stuck if using 2 different phone - changed some reference to "device" to "phone" to remove ambiguity 1.3.9 08/16/2025 - add several failsafe layer for immobilizers to prevent getting stucked at always immobilized - Fix PWM mode radiator fan issue not applying cycle time properly - Fix increasing value check for 1D tables 1.3.8 06/17/2025 ECU 1.3.7 Changelog - add injector limit diagnostic description - remove ability to set mode if mode is not exist/created yet - add warning for staytuned screen - fix issue app crashing if start diagnose is turned on when staytuned is on tuning screen and navigates to adjust spark - fix locked tuner mode - swapping from locked and unlocked is currently not supported - when deleting mode file, make sure to clear mode's session value - auto create mode rumble - auto create mode antilag - added advance setting in tps calibration - remove code duplication for reading mapping file and applying map file (download and load mapping) - update some ui name for O2 Sensor default - update maxengine temp allowed for staytuned's - fix change password bug showing wrong current password 1.3.7 06/04/2025 - Fix issue when tuning > start diag will cause the app to hang/not responding/diag stop getting data from ECU - ranking UI fix for long ecu model name - fix locked table issue - enable spark tabs when staytuned is enabled - add info for user ecu is tuning piggy back style - add injector limit diagnostic - add injector limit indicator in tuning screen 1.3.6 05/09/2025 - fix issue loading map created in 1.3.3 failed - stayTuned improvement > enabled start diag to be able to see realtime tps/rpm and delta values adjusted in map tuning - stayTuned config screen improvement > enable few other settings 1.3.5 04/30/2025 - Migration update, some change may breaks, do inform our team if any issues. - fix bugs in 1.3.3 (applied to some yamaha models) - StayTuned improvements for more readibility 1.3.4 04/20/2025 Added support for MT25 2020 Added support for MT03 2020 Added support for R25 2020 Added support for R3 2020 1.3.3 04/07/2025 - fix bugs in 1.3.1 (some submenu not shown for certain ecu) 1.3.2 03/20/2025 - Fix issue with old mode returning misc3 unable to read for certain ECU - Removed 10 years Lucky Draw icon - Hide upgradables for stage 1 ECU - Adjustment for StayTuned enabled (showing delta instead of mapping values) - Add ecu region variable check (for permanent stage 1 indo ECU) - Fix UI issue when changing password (password updated, but notification failed to inform user) 1.3.1 03/17/2025 - Added Write and set button for Aux - Updating staytuned status check so that it also disables tuning if staytuned is active - Added o2 Error highlights on AFR for dashboard and diagnostics - Prevent server issue is causing app not able to connect with tuneboss - Prevent server issue is causing app not able to load mode screen - UI Update Radiator fan - no longer show turn on/off temperature for always on/off mode - Default value for PWM cycle time changed to 5s from 10s - Added Min Max value for Rad Fan PWM cycle time - Added Speed number and pin on rankings > view map - Added bike with no support for MAP and IAT 1.3.0 02/28/2025

TuneBoss ECU version 1.5.4

Updated At: 2026-09-04

Changes: Version History - Add a clear Stages label on middle bottom nav bar logo - Revert/Fix TPS Calibration header that causing white screen after finish calibration 1.5.4 5d ago fix some flashing issue in tps calibration 1.5.3 Aug 26 - Reworked StayTuned - Added Light UI for tuning table (legacy app color scheme) - Improved Text visibility for tuning table - Fix cell value adjust bottom panel to be able to write even when opened state like before 1.5.2 Aug 20 - Fix Mode Corrupt when first created - Fix issue not able to share TBD file when in trip details - Added New Trip Detail screen - Added Fuel Settings screen - Update UI for shiftboss - Added Map file - Added Traction Control screen - Added more model for side stand support - Added Advanced TPS Acceleration - Improved Device info and warranty screen - Added new metermode analog skin - AFR and Injection Angle will now be available when StayTuned is active - Added Idle Control new group for idle 1.5.1 Aug 12 - Fix Stuck loading when wrong default password is used - Added ADV350 Meter Selection - Added scanner state on device list screen - Scanner on device list screen will automatically start after 10s cooldown 1.5.0 Jul 4 - Fix Stuck loading when wrong default password is used - Added ADV350 Meter Selection 1.4.9 Jun 11 - Added Auto Reconnect setting (experimental) - Prevent app crash if possible on communications failure - always reconnect on metermode (if auto reconnect enabled in settings) - Possible fix nav left/right stuck - do report to us if issue persist - Fix loading closed prematurely exposing start button before initial handshake with ecu - Y150zr v2 rename to Y15ZR 2019 - 2 cyl ecu stage 1 stuck when loading stage 2 mapping - fix download mapping froze on certain new model 1.4.8 Jun 6 - Fixed GPS duplicated instance - Added auto start stream to reconnect on metermode - Fix Mode Config loading - Fix Always on screen metermode - Added auto start diagnose on metermode - Fix infinite loading screens 1.4.7 May 26 Fix forza selection stuck Fix to Nav to first time TPS cal not working 1.4.6 May 15 - UI optimization - Enhanced UI state management - Added hyper fast reconnect - Fixed issue failed to update top speed on rankings - Fixed ble status shows ready even if bluetooth off - Fixed permission status shows denined when first-time installation - Update mode blocking duplicate modes - Update blocking swipe immediately after starting stream - Fixed issue failed to update top speed on rankings 1.4.5 May 8 - Added xmax, xmax v2, xmax v3 cross compatibility downloaded mapping - Added modenas and voge manufacturer - Added Avantis for sidestand menu - ShiftBoss - Stage 3 Min RPM - ShiftBoss - Advance QS - move ATAS setting to a new screen - auto connect to default ECU now checks for bluetooth readiness - Add auto connect to default ECU 1.4.4 Feb 19 - added last connected ECU - Fix issue with Gixxer 250 and VStrom 250's default radiator fan value - Update max radiator fan values - Minor UI changes on sidestand setting - Minor UI changes on reset factory setting 1.4.3 11/12/2025 - Added export to csv type for trips detail (datalog) - Added notification upon successfully activation sync - Move to new api for app version - Added new screen start fuel compensation 1.4.2 10/28/2025 - minor adjustment on password entry screen - fix some crashing issues on disconnect/reconnect - fix mode creation for first time will result in corrupted mode - added windshield control for xmax v3 1.4.1 10/02/2025 ECU 1.4.0 RC1 Changelog - reduce connection wait time 1.4.0 09/02/2025 - Fix language selection not sticking - GPS top speed filter gps glitch - Added play/pause on datalog viewer - Added more translation text - Update shiftboss min value when manual mode - Fixed bug on smooth shift stuck even after changing Shiftboss Mode - Added sync loss counter on diagnostic screen - Added Spark angle mini meter on pro adjustment table - Remove Dual injector from all dual cyl motor cycle - Ranking now supports Indonesian entry - Fix few issue with new api Ranking - Added XmaX v3 on supported bike - Fix issue with shiftlight immobilizer indicator got stuck if using 2 different phone - changed some reference to "device" to "phone" to remove ambiguity 1.3.9 08/16/2025 - add several failsafe layer for immobilizers to prevent getting stucked at always immobilized - Fix PWM mode radiator fan issue not applying cycle time properly - Fix increasing value check for 1D tables 1.3.8 06/17/2025 ECU 1.3.7 Changelog - add injector limit diagnostic description - remove ability to set mode if mode is not exist/created yet - add warning for staytuned screen - fix issue app crashing if start diagnose is turned on when staytuned is on tuning screen and navigates to adjust spark - fix locked tuner mode - swapping from locked and unlocked is currently not supported - when deleting mode file, make sure to clear mode's session value - auto create mode rumble - auto create mode antilag - added advance setting in tps calibration - remove code duplication for reading mapping file and applying map file (download and load mapping) - update some ui name for O2 Sensor default - update maxengine temp allowed for staytuned's - fix change password bug showing wrong current password 1.3.7 06/04/2025 - Fix issue when tuning > start diag will cause the app to hang/not responding/diag stop getting data from ECU - ranking UI fix for long ecu model name - fix locked table issue - enable spark tabs when staytuned is enabled - add info for user ecu is tuning piggy back style - add injector limit diagnostic - add injector limit indicator in tuning screen 1.3.6 05/09/2025 - fix issue loading map created in 1.3.3 failed - stayTuned improvement > enabled start diag to be able to see realtime tps/rpm and delta values adjusted in map tuning - stayTuned config screen improvement > enable few other settings 1.3.5 04/30/2025 - Migration update, some change may breaks, do inform our team if any issues. - fix bugs in 1.3.3 (applied to some yamaha models) - StayTuned improvements for more readibility 1.3.4 04/20/2025 Added support for MT25 2020 Added support for MT03 2020 Added support for R25 2020 Added support for R3 2020 1.3.3 04/07/2025 - fix bugs in 1.3.1 (some submenu not shown for certain ecu) 1.3.2 03/20/2025 - Fix issue with old mode returning misc3 unable to read for certain ECU - Removed 10 years Lucky Draw icon - Hide upgradables for stage 1 ECU - Adjustment for StayTuned enabled (showing delta instead of mapping values) - Add ecu region variable check (for permanent stage 1 indo ECU) - Fix UI issue when changing password (password updated, but notification failed to inform user) 1.3.1 03/17/2025 - Added Write and set button for Aux - Updating staytuned status check so that it also disables tuning if staytuned is active - Added o2 Error highlights on AFR for dashboard and diagnostics - Prevent server issue is causing app not able to connect with tuneboss - Prevent server issue is causing app not able to load mode screen - UI Update Radiator fan - no longer show turn on/off temperature for always on/off mode - Default value for PWM cycle time changed to 5s from 10s - Added Min Max value for Rad Fan PWM cycle time - Added Speed number and pin on rankings > view map - Added bike with no support for MAP and IAT 1.3.0 02/28/2025

TuneBoss ECU version 1.5.2

Updated At: 2026-08-23

Changes: Version History - Reworked StayTuned - Added Light UI for tuning table (legacy app color scheme) - Improved Text visibility for tuning table - Fix cell value adjust bottom panel to be able to write even when opened state like before 1.5.2 3d ago - Fix Mode Corrupt when first created - Fix issue not able to share TBD file when in trip details - Added New Trip Detail screen - Added Fuel Settings screen - Update UI for shiftboss - Added Map file - Added Traction Control screen - Added more model for side stand support - Added Advanced TPS Acceleration - Improved Device info and warranty screen - Added new metermode analog skin - AFR and Injection Angle will now be available when StayTuned is active - Added Idle Control new group for idle 1.5.1 Aug 12 - Fix Stuck loading when wrong default password is used - Added ADV350 Meter Selection - Added scanner state on device list screen - Scanner on device list screen will automatically start after 10s cooldown 1.5.0 Jul 4 - Fix Stuck loading when wrong default password is used - Added ADV350 Meter Selection 1.4.9 Jun 11 - Added Auto Reconnect setting (experimental) - Prevent app crash if possible on communications failure - always reconnect on metermode (if auto reconnect enabled in settings) - Possible fix nav left/right stuck - do report to us if issue persist - Fix loading closed prematurely exposing start button before initial handshake with ecu - Y150zr v2 rename to Y15ZR 2019 - 2 cyl ecu stage 1 stuck when loading stage 2 mapping - fix download mapping froze on certain new model 1.4.8 Jun 6 - Fixed GPS duplicated instance - Added auto start stream to reconnect on metermode - Fix Mode Config loading - Fix Always on screen metermode - Added auto start diagnose on metermode - Fix infinite loading screens 1.4.7 May 26 Fix forza selection stuck Fix to Nav to first time TPS cal not working 1.4.6 May 15 - UI optimization - Enhanced UI state management - Added hyper fast reconnect - Fixed issue failed to update top speed on rankings - Fixed ble status shows ready even if bluetooth off - Fixed permission status shows denined when first-time installation - Update mode blocking duplicate modes - Update blocking swipe immediately after starting stream - Fixed issue failed to update top speed on rankings 1.4.5 May 8 - Added xmax, xmax v2, xmax v3 cross compatibility downloaded mapping - Added modenas and voge manufacturer - Added Avantis for sidestand menu - ShiftBoss - Stage 3 Min RPM - ShiftBoss - Advance QS - move ATAS setting to a new screen - auto connect to default ECU now checks for bluetooth readiness - Add auto connect to default ECU 1.4.4 Feb 19 - added last connected ECU - Fix issue with Gixxer 250 and VStrom 250's default radiator fan value - Update max radiator fan values - Minor UI changes on sidestand setting - Minor UI changes on reset factory setting 1.4.3 11/12/2025 - Added export to csv type for trips detail (datalog) - Added notification upon successfully activation sync - Move to new api for app version - Added new screen start fuel compensation 1.4.2 10/28/2025 - minor adjustment on password entry screen - fix some crashing issues on disconnect/reconnect - fix mode creation for first time will result in corrupted mode - added windshield control for xmax v3 1.4.1 10/02/2025 ECU 1.4.0 RC1 Changelog - reduce connection wait time 1.4.0 09/02/2025 - Fix language selection not sticking - GPS top speed filter gps glitch - Added play/pause on datalog viewer - Added more translation text - Update shiftboss min value when manual mode - Fixed bug on smooth shift stuck even after changing Shiftboss Mode - Added sync loss counter on diagnostic screen - Added Spark angle mini meter on pro adjustment table - Remove Dual injector from all dual cyl motor cycle - Ranking now supports Indonesian entry - Fix few issue with new api Ranking - Added XmaX v3 on supported bike - Fix issue with shiftlight immobilizer indicator got stuck if using 2 different phone - changed some reference to "device" to "phone" to remove ambiguity 1.3.9 08/16/2025 - add several failsafe layer for immobilizers to prevent getting stucked at always immobilized - Fix PWM mode radiator fan issue not applying cycle time properly - Fix increasing value check for 1D tables 1.3.8 06/17/2025 ECU 1.3.7 Changelog - add injector limit diagnostic description - remove ability to set mode if mode is not exist/created yet - add warning for staytuned screen - fix issue app crashing if start diagnose is turned on when staytuned is on tuning screen and navigates to adjust spark - fix locked tuner mode - swapping from locked and unlocked is currently not supported - when deleting mode file, make sure to clear mode's session value - auto create mode rumble - auto create mode antilag - added advance setting in tps calibration - remove code duplication for reading mapping file and applying map file (download and load mapping) - update some ui name for O2 Sensor default - update maxengine temp allowed for staytuned's - fix change password bug showing wrong current password 1.3.7 06/04/2025 - Fix issue when tuning > start diag will cause the app to hang/not responding/diag stop getting data from ECU - ranking UI fix for long ecu model name - fix locked table issue - enable spark tabs when staytuned is enabled - add info for user ecu is tuning piggy back style - add injector limit diagnostic - add injector limit indicator in tuning screen 1.3.6 05/09/2025 - fix issue loading map created in 1.3.3 failed - stayTuned improvement > enabled start diag to be able to see realtime tps/rpm and delta values adjusted in map tuning - stayTuned config screen improvement > enable few other settings 1.3.5 04/30/2025 - Migration update, some change may breaks, do inform our team if any issues. - fix bugs in 1.3.3 (applied to some yamaha models) - StayTuned improvements for more readibility 1.3.4 04/20/2025 Added support for MT25 2020 Added support for MT03 2020 Added support for R25 2020 Added support for R3 2020 1.3.3 04/07/2025 - fix bugs in 1.3.1 (some submenu not shown for certain ecu) 1.3.2 03/20/2025 - Fix issue with old mode returning misc3 unable to read for certain ECU - Removed 10 years Lucky Draw icon - Hide upgradables for stage 1 ECU - Adjustment for StayTuned enabled (showing delta instead of mapping values) - Add ecu region variable check (for permanent stage 1 indo ECU) - Fix UI issue when changing password (password updated, but notification failed to inform user) 1.3.1 03/17/2025 - Added Write and set button for Aux - Updating staytuned status check so that it also disables tuning if staytuned is active - Added o2 Error highlights on AFR for dashboard and diagnostics - Prevent server issue is causing app not able to connect with tuneboss - Prevent server issue is causing app not able to load mode screen - UI Update Radiator fan - no longer show turn on/off temperature for always on/off mode - Default value for PWM cycle time changed to 5s from 10s - Added Min Max value for Rad Fan PWM cycle time - Added Speed number and pin on rankings > view map - Added bike with no support for MAP and IAT 1.3.0 02/28/2025 fix connection issue 1.2.9 01/26/2025 - Fix overflow text for r15 in rankings - Fix Immmobilizer status stays on if device powered off - UI Cleanup - trip detail - UI Cleanup - notification for unsupported file extension share into app - Fix crash when stop button is press during tps calibration - Fix PWM mode not turning off radiator fan if previous setting is set to always on - Added Rad Fan PWM mode's default values 1.2.8 01/19/2025

TuneBoss ECU version 1.5.0

Updated At: 2026-08-03

Changes: Version History - Fix Stuck loading when wrong default password is used - Added ADV350 Meter Selection - Added scanner state on device list screen - Scanner on device list screen will automatically start after 10s cooldown 1.5.0 Jul 4 - Fix Stuck loading when wrong default password is used - Added ADV350 Meter Selection 1.4.9 Jun 11 - Added Auto Reconnect setting (experimental) - Prevent app crash if possible on communications failure - always reconnect on metermode (if auto reconnect enabled in settings) - Possible fix nav left/right stuck - do report to us if issue persist - Fix loading closed prematurely exposing start button before initial handshake with ecu - Y150zr v2 rename to Y15ZR 2019 - 2 cyl ecu stage 1 stuck when loading stage 2 mapping - fix download mapping froze on certain new model 1.4.8 Jun 6 - Fixed GPS duplicated instance - Added auto start stream to reconnect on metermode - Fix Mode Config loading - Fix Always on screen metermode - Added auto start diagnose on metermode - Fix infinite loading screens 1.4.7 May 26 Fix forza selection stuck Fix to Nav to first time TPS cal not working 1.4.6 May 15 - UI optimization - Enhanced UI state management - Added hyper fast reconnect - Fixed issue failed to update top speed on rankings - Fixed ble status shows ready even if bluetooth off - Fixed permission status shows denined when first-time installation - Update mode blocking duplicate modes - Update blocking swipe immediately after starting stream - Fixed issue failed to update top speed on rankings 1.4.5 May 8 - Added xmax, xmax v2, xmax v3 cross compatibility downloaded mapping - Added modenas and voge manufacturer - Added Avantis for sidestand menu - ShiftBoss - Stage 3 Min RPM - ShiftBoss - Advance QS - move ATAS setting to a new screen - auto connect to default ECU now checks for bluetooth readiness - Add auto connect to default ECU 1.4.4 Feb 19 - added last connected ECU - Fix issue with Gixxer 250 and VStrom 250's default radiator fan value - Update max radiator fan values - Minor UI changes on sidestand setting - Minor UI changes on reset factory setting 1.4.3 11/12/2025 - Added export to csv type for trips detail (datalog) - Added notification upon successfully activation sync - Move to new api for app version - Added new screen start fuel compensation 1.4.2 10/28/2025 - minor adjustment on password entry screen - fix some crashing issues on disconnect/reconnect - fix mode creation for first time will result in corrupted mode - added windshield control for xmax v3 1.4.1 10/02/2025 ECU 1.4.0 RC1 Changelog - reduce connection wait time 1.4.0 09/02/2025 - Fix language selection not sticking - GPS top speed filter gps glitch - Added play/pause on datalog viewer - Added more translation text - Update shiftboss min value when manual mode - Fixed bug on smooth shift stuck even after changing Shiftboss Mode - Added sync loss counter on diagnostic screen - Added Spark angle mini meter on pro adjustment table - Remove Dual injector from all dual cyl motor cycle - Ranking now supports Indonesian entry - Fix few issue with new api Ranking - Added XmaX v3 on supported bike - Fix issue with shiftlight immobilizer indicator got stuck if using 2 different phone - changed some reference to "device" to "phone" to remove ambiguity 1.3.9 08/16/2025 - add several failsafe layer for immobilizers to prevent getting stucked at always immobilized - Fix PWM mode radiator fan issue not applying cycle time properly - Fix increasing value check for 1D tables 1.3.8 06/17/2025 ECU 1.3.7 Changelog - add injector limit diagnostic description - remove ability to set mode if mode is not exist/created yet - add warning for staytuned screen - fix issue app crashing if start diagnose is turned on when staytuned is on tuning screen and navigates to adjust spark - fix locked tuner mode - swapping from locked and unlocked is currently not supported - when deleting mode file, make sure to clear mode's session value - auto create mode rumble - auto create mode antilag - added advance setting in tps calibration - remove code duplication for reading mapping file and applying map file (download and load mapping) - update some ui name for O2 Sensor default - update maxengine temp allowed for staytuned's - fix change password bug showing wrong current password 1.3.7 06/04/2025 - Fix issue when tuning > start diag will cause the app to hang/not responding/diag stop getting data from ECU - ranking UI fix for long ecu model name - fix locked table issue - enable spark tabs when staytuned is enabled - add info for user ecu is tuning piggy back style - add injector limit diagnostic - add injector limit indicator in tuning screen 1.3.6 05/09/2025 - fix issue loading map created in 1.3.3 failed - stayTuned improvement > enabled start diag to be able to see realtime tps/rpm and delta values adjusted in map tuning - stayTuned config screen improvement > enable few other settings 1.3.5 04/30/2025 - Migration update, some change may breaks, do inform our team if any issues. - fix bugs in 1.3.3 (applied to some yamaha models) - StayTuned improvements for more readibility 1.3.4 04/20/2025 Added support for MT25 2020 Added support for MT03 2020 Added support for R25 2020 Added support for R3 2020 1.3.3 04/07/2025 - fix bugs in 1.3.1 (some submenu not shown for certain ecu) 1.3.2 03/20/2025 - Fix issue with old mode returning misc3 unable to read for certain ECU - Removed 10 years Lucky Draw icon - Hide upgradables for stage 1 ECU - Adjustment for StayTuned enabled (showing delta instead of mapping values) - Add ecu region variable check (for permanent stage 1 indo ECU) - Fix UI issue when changing password (password updated, but notification failed to inform user) 1.3.1 03/17/2025 - Added Write and set button for Aux - Updating staytuned status check so that it also disables tuning if staytuned is active - Added o2 Error highlights on AFR for dashboard and diagnostics - Prevent server issue is causing app not able to connect with tuneboss - Prevent server issue is causing app not able to load mode screen - UI Update Radiator fan - no longer show turn on/off temperature for always on/off mode - Default value for PWM cycle time changed to 5s from 10s - Added Min Max value for Rad Fan PWM cycle time - Added Speed number and pin on rankings > view map - Added bike with no support for MAP and IAT 1.3.0 02/28/2025 fix connection issue 1.2.9 01/26/2025 - Fix overflow text for r15 in rankings - Fix Immmobilizer status stays on if device powered off - UI Cleanup - trip detail - UI Cleanup - notification for unsupported file extension share into app - Fix crash when stop button is press during tps calibration - Fix PWM mode not turning off radiator fan if previous setting is set to always on - Added Rad Fan PWM mode's default values 1.2.8 01/19/2025 * Fixed notification message in app not showing after tapping notification 1.2.7 12/27/2024 * Fixed StayTuned not flashing memory issue * Fixed downloaded mapping (stage 2) not applying correct calculation to stage 1 ecu 1.2.6 12/16/2024

TuneBoss ECU version 1.4.9

Updated At: 2026-07-01

Changes: Version History - Fix Stuck loading when wrong default password is used - Added ADV350 Meter Selection 1.4.9 Jun 11 - Added Auto Reconnect setting (experimental) - Prevent app crash if possible on communications failure - always reconnect on metermode (if auto reconnect enabled in settings) - Possible fix nav left/right stuck - do report to us if issue persist - Fix loading closed prematurely exposing start button before initial handshake with ecu - Y150zr v2 rename to Y15ZR 2019 - 2 cyl ecu stage 1 stuck when loading stage 2 mapping - fix download mapping froze on certain new model 1.4.8 Jun 6 - Fixed GPS duplicated instance - Added auto start stream to reconnect on metermode - Fix Mode Config loading - Fix Always on screen metermode - Added auto start diagnose on metermode - Fix infinite loading screens 1.4.7 May 26 Fix forza selection stuck Fix to Nav to first time TPS cal not working 1.4.6 May 15 - UI optimization - Enhanced UI state management - Added hyper fast reconnect - Fixed issue failed to update top speed on rankings - Fixed ble status shows ready even if bluetooth off - Fixed permission status shows denined when first-time installation - Update mode blocking duplicate modes - Update blocking swipe immediately after starting stream - Fixed issue failed to update top speed on rankings 1.4.5 May 8 - Added xmax, xmax v2, xmax v3 cross compatibility downloaded mapping - Added modenas and voge manufacturer - Added Avantis for sidestand menu - ShiftBoss - Stage 3 Min RPM - ShiftBoss - Advance QS - move ATAS setting to a new screen - auto connect to default ECU now checks for bluetooth readiness - Add auto connect to default ECU 1.4.4 Feb 19 - added last connected ECU - Fix issue with Gixxer 250 and VStrom 250's default radiator fan value - Update max radiator fan values - Minor UI changes on sidestand setting - Minor UI changes on reset factory setting 1.4.3 11/12/2025 - Added export to csv type for trips detail (datalog) - Added notification upon successfully activation sync - Move to new api for app version - Added new screen start fuel compensation 1.4.2 10/28/2025 - minor adjustment on password entry screen - fix some crashing issues on disconnect/reconnect - fix mode creation for first time will result in corrupted mode - added windshield control for xmax v3 1.4.1 10/02/2025 ECU 1.4.0 RC1 Changelog - reduce connection wait time 1.4.0 09/02/2025 - Fix language selection not sticking - GPS top speed filter gps glitch - Added play/pause on datalog viewer - Added more translation text - Update shiftboss min value when manual mode - Fixed bug on smooth shift stuck even after changing Shiftboss Mode - Added sync loss counter on diagnostic screen - Added Spark angle mini meter on pro adjustment table - Remove Dual injector from all dual cyl motor cycle - Ranking now supports Indonesian entry - Fix few issue with new api Ranking - Added XmaX v3 on supported bike - Fix issue with shiftlight immobilizer indicator got stuck if using 2 different phone - changed some reference to "device" to "phone" to remove ambiguity 1.3.9 08/16/2025 - add several failsafe layer for immobilizers to prevent getting stucked at always immobilized - Fix PWM mode radiator fan issue not applying cycle time properly - Fix increasing value check for 1D tables 1.3.8 06/17/2025 ECU 1.3.7 Changelog - add injector limit diagnostic description - remove ability to set mode if mode is not exist/created yet - add warning for staytuned screen - fix issue app crashing if start diagnose is turned on when staytuned is on tuning screen and navigates to adjust spark - fix locked tuner mode - swapping from locked and unlocked is currently not supported - when deleting mode file, make sure to clear mode's session value - auto create mode rumble - auto create mode antilag - added advance setting in tps calibration - remove code duplication for reading mapping file and applying map file (download and load mapping) - update some ui name for O2 Sensor default - update maxengine temp allowed for staytuned's - fix change password bug showing wrong current password 1.3.7 06/04/2025 - Fix issue when tuning > start diag will cause the app to hang/not responding/diag stop getting data from ECU - ranking UI fix for long ecu model name - fix locked table issue - enable spark tabs when staytuned is enabled - add info for user ecu is tuning piggy back style - add injector limit diagnostic - add injector limit indicator in tuning screen 1.3.6 05/09/2025 - fix issue loading map created in 1.3.3 failed - stayTuned improvement > enabled start diag to be able to see realtime tps/rpm and delta values adjusted in map tuning - stayTuned config screen improvement > enable few other settings 1.3.5 04/30/2025 - Migration update, some change may breaks, do inform our team if any issues. - fix bugs in 1.3.3 (applied to some yamaha models) - StayTuned improvements for more readibility 1.3.4 04/20/2025 Added support for MT25 2020 Added support for MT03 2020 Added support for R25 2020 Added support for R3 2020 1.3.3 04/07/2025 - fix bugs in 1.3.1 (some submenu not shown for certain ecu) 1.3.2 03/20/2025 - Fix issue with old mode returning misc3 unable to read for certain ECU - Removed 10 years Lucky Draw icon - Hide upgradables for stage 1 ECU - Adjustment for StayTuned enabled (showing delta instead of mapping values) - Add ecu region variable check (for permanent stage 1 indo ECU) - Fix UI issue when changing password (password updated, but notification failed to inform user) 1.3.1 03/17/2025 - Added Write and set button for Aux - Updating staytuned status check so that it also disables tuning if staytuned is active - Added o2 Error highlights on AFR for dashboard and diagnostics - Prevent server issue is causing app not able to connect with tuneboss - Prevent server issue is causing app not able to load mode screen - UI Update Radiator fan - no longer show turn on/off temperature for always on/off mode - Default value for PWM cycle time changed to 5s from 10s - Added Min Max value for Rad Fan PWM cycle time - Added Speed number and pin on rankings > view map - Added bike with no support for MAP and IAT 1.3.0 02/28/2025 fix connection issue 1.2.9 01/26/2025 - Fix overflow text for r15 in rankings - Fix Immmobilizer status stays on if device powered off - UI Cleanup - trip detail - UI Cleanup - notification for unsupported file extension share into app - Fix crash when stop button is press during tps calibration - Fix PWM mode not turning off radiator fan if previous setting is set to always on - Added Rad Fan PWM mode's default values 1.2.8 01/19/2025 * Fixed notification message in app not showing after tapping notification 1.2.7 12/27/2024 * Fixed StayTuned not flashing memory issue * Fixed downloaded mapping (stage 2) not applying correct calculation to stage 1 ecu 1.2.6 12/16/2024 * Fixed automatically created mode 2.0 (if no mode file on phone and server) bug creating bad conversion mode * Added a prompt for user if ECU memory is corrupt * ATAS is now available for all ECU with fw 15.3 and above (not just LCv8) * Added import .tbd (datalog) * Added share datalog in view trips 1.2.5 12/08/2024

TuneBoss ECU version 1.4.8

Updated At: 2026-06-10

Changes: Version History - Added Auto Reconnect setting (experimental) - Prevent app crash if possible on communications failure - always reconnect on metermode (if auto reconnect enabled in settings) - Possible fix nav left/right stuck - do report to us if issue persist - Fix loading closed prematurely exposing start button before initial handshake with ecu - Y150zr v2 rename to Y15ZR 2019 - 2 cyl ecu stage 1 stuck when loading stage 2 mapping - fix download mapping froze on certain new model 1.4.8 4d ago - Fixed GPS duplicated instance - Added auto start stream to reconnect on metermode - Fix Mode Config loading - Fix Always on screen metermode - Added auto start diagnose on metermode - Fix infinite loading screens 1.4.7 May 26 Fix forza selection stuck Fix to Nav to first time TPS cal not working 1.4.6 May 15 - UI optimization - Enhanced UI state management - Added hyper fast reconnect - Fixed issue failed to update top speed on rankings - Fixed ble status shows ready even if bluetooth off - Fixed permission status shows denined when first-time installation - Update mode blocking duplicate modes - Update blocking swipe immediately after starting stream - Fixed issue failed to update top speed on rankings 1.4.5 May 8 - Added xmax, xmax v2, xmax v3 cross compatibility downloaded mapping - Added modenas and voge manufacturer - Added Avantis for sidestand menu - ShiftBoss - Stage 3 Min RPM - ShiftBoss - Advance QS - move ATAS setting to a new screen - auto connect to default ECU now checks for bluetooth readiness - Add auto connect to default ECU 1.4.4 Feb 19 - added last connected ECU - Fix issue with Gixxer 250 and VStrom 250's default radiator fan value - Update max radiator fan values - Minor UI changes on sidestand setting - Minor UI changes on reset factory setting 1.4.3 11/12/2025 - Added export to csv type for trips detail (datalog) - Added notification upon successfully activation sync - Move to new api for app version - Added new screen start fuel compensation 1.4.2 10/28/2025 - minor adjustment on password entry screen - fix some crashing issues on disconnect/reconnect - fix mode creation for first time will result in corrupted mode - added windshield control for xmax v3 1.4.1 10/02/2025 ECU 1.4.0 RC1 Changelog - reduce connection wait time 1.4.0 09/02/2025 - Fix language selection not sticking - GPS top speed filter gps glitch - Added play/pause on datalog viewer - Added more translation text - Update shiftboss min value when manual mode - Fixed bug on smooth shift stuck even after changing Shiftboss Mode - Added sync loss counter on diagnostic screen - Added Spark angle mini meter on pro adjustment table - Remove Dual injector from all dual cyl motor cycle - Ranking now supports Indonesian entry - Fix few issue with new api Ranking - Added XmaX v3 on supported bike - Fix issue with shiftlight immobilizer indicator got stuck if using 2 different phone - changed some reference to "device" to "phone" to remove ambiguity 1.3.9 08/16/2025 - add several failsafe layer for immobilizers to prevent getting stucked at always immobilized - Fix PWM mode radiator fan issue not applying cycle time properly - Fix increasing value check for 1D tables 1.3.8 06/17/2025 ECU 1.3.7 Changelog - add injector limit diagnostic description - remove ability to set mode if mode is not exist/created yet - add warning for staytuned screen - fix issue app crashing if start diagnose is turned on when staytuned is on tuning screen and navigates to adjust spark - fix locked tuner mode - swapping from locked and unlocked is currently not supported - when deleting mode file, make sure to clear mode's session value - auto create mode rumble - auto create mode antilag - added advance setting in tps calibration - remove code duplication for reading mapping file and applying map file (download and load mapping) - update some ui name for O2 Sensor default - update maxengine temp allowed for staytuned's - fix change password bug showing wrong current password 1.3.7 06/04/2025 - Fix issue when tuning > start diag will cause the app to hang/not responding/diag stop getting data from ECU - ranking UI fix for long ecu model name - fix locked table issue - enable spark tabs when staytuned is enabled - add info for user ecu is tuning piggy back style - add injector limit diagnostic - add injector limit indicator in tuning screen 1.3.6 05/09/2025 - fix issue loading map created in 1.3.3 failed - stayTuned improvement > enabled start diag to be able to see realtime tps/rpm and delta values adjusted in map tuning - stayTuned config screen improvement > enable few other settings 1.3.5 04/30/2025 - Migration update, some change may breaks, do inform our team if any issues. - fix bugs in 1.3.3 (applied to some yamaha models) - StayTuned improvements for more readibility 1.3.4 04/20/2025 Added support for MT25 2020 Added support for MT03 2020 Added support for R25 2020 Added support for R3 2020 1.3.3 04/07/2025 - fix bugs in 1.3.1 (some submenu not shown for certain ecu) 1.3.2 03/20/2025 - Fix issue with old mode returning misc3 unable to read for certain ECU - Removed 10 years Lucky Draw icon - Hide upgradables for stage 1 ECU - Adjustment for StayTuned enabled (showing delta instead of mapping values) - Add ecu region variable check (for permanent stage 1 indo ECU) - Fix UI issue when changing password (password updated, but notification failed to inform user) 1.3.1 03/17/2025 - Added Write and set button for Aux - Updating staytuned status check so that it also disables tuning if staytuned is active - Added o2 Error highlights on AFR for dashboard and diagnostics - Prevent server issue is causing app not able to connect with tuneboss - Prevent server issue is causing app not able to load mode screen - UI Update Radiator fan - no longer show turn on/off temperature for always on/off mode - Default value for PWM cycle time changed to 5s from 10s - Added Min Max value for Rad Fan PWM cycle time - Added Speed number and pin on rankings > view map - Added bike with no support for MAP and IAT 1.3.0 02/28/2025 fix connection issue 1.2.9 01/26/2025 - Fix overflow text for r15 in rankings - Fix Immmobilizer status stays on if device powered off - UI Cleanup - trip detail - UI Cleanup - notification for unsupported file extension share into app - Fix crash when stop button is press during tps calibration - Fix PWM mode not turning off radiator fan if previous setting is set to always on - Added Rad Fan PWM mode's default values 1.2.8 01/19/2025 * Fixed notification message in app not showing after tapping notification 1.2.7 12/27/2024 * Fixed StayTuned not flashing memory issue * Fixed downloaded mapping (stage 2) not applying correct calculation to stage 1 ecu 1.2.6 12/16/2024 * Fixed automatically created mode 2.0 (if no mode file on phone and server) bug creating bad conversion mode * Added a prompt for user if ECU memory is corrupt * ATAS is now available for all ECU with fw 15.3 and above (not just LCv8) * Added import .tbd (datalog) * Added share datalog in view trips 1.2.5 12/08/2024 Fixed Crashing issues on 1.2.3 1.2.4 10/25/2024

TuneBoss ECU version 1.4.5

Updated At: 2026-05-08

Changes: Version History - UI optimization - Enhanced UI state management - Added hyper fast reconnect - Fixed issue failed to update top speed on rankings - Fixed ble status shows ready even if bluetooth off - Fixed permission status shows denined when first-time installation - Update mode blocking duplicate modes - Update blocking swipe immediately after starting stream - Fixed issue failed to update top speed on rankings 1.4.5 1h ago - Added xmax, xmax v2, xmax v3 cross compatibility downloaded mapping - Added modenas and voge manufacturer - Added Avantis for sidestand menu - ShiftBoss - Stage 3 Min RPM - ShiftBoss - Advance QS - move ATAS setting to a new screen - auto connect to default ECU now checks for bluetooth readiness - Add auto connect to default ECU 1.4.4 Feb 19 - added last connected ECU - Fix issue with Gixxer 250 and VStrom 250's default radiator fan value - Update max radiator fan values - Minor UI changes on sidestand setting - Minor UI changes on reset factory setting 1.4.3 11/12/2025 - Added export to csv type for trips detail (datalog) - Added notification upon successfully activation sync - Move to new api for app version - Added new screen start fuel compensation 1.4.2 10/28/2025 - minor adjustment on password entry screen - fix some crashing issues on disconnect/reconnect - fix mode creation for first time will result in corrupted mode - added windshield control for xmax v3 1.4.1 10/02/2025 ECU 1.4.0 RC1 Changelog - reduce connection wait time 1.4.0 09/02/2025 - Fix language selection not sticking - GPS top speed filter gps glitch - Added play/pause on datalog viewer - Added more translation text - Update shiftboss min value when manual mode - Fixed bug on smooth shift stuck even after changing Shiftboss Mode - Added sync loss counter on diagnostic screen - Added Spark angle mini meter on pro adjustment table - Remove Dual injector from all dual cyl motor cycle - Ranking now supports Indonesian entry - Fix few issue with new api Ranking - Added XmaX v3 on supported bike - Fix issue with shiftlight immobilizer indicator got stuck if using 2 different phone - changed some reference to "device" to "phone" to remove ambiguity 1.3.9 08/16/2025 - add several failsafe layer for immobilizers to prevent getting stucked at always immobilized - Fix PWM mode radiator fan issue not applying cycle time properly - Fix increasing value check for 1D tables 1.3.8 06/17/2025 ECU 1.3.7 Changelog - add injector limit diagnostic description - remove ability to set mode if mode is not exist/created yet - add warning for staytuned screen - fix issue app crashing if start diagnose is turned on when staytuned is on tuning screen and navigates to adjust spark - fix locked tuner mode - swapping from locked and unlocked is currently not supported - when deleting mode file, make sure to clear mode's session value - auto create mode rumble - auto create mode antilag - added advance setting in tps calibration - remove code duplication for reading mapping file and applying map file (download and load mapping) - update some ui name for O2 Sensor default - update maxengine temp allowed for staytuned's - fix change password bug showing wrong current password 1.3.7 06/04/2025 - Fix issue when tuning > start diag will cause the app to hang/not responding/diag stop getting data from ECU - ranking UI fix for long ecu model name - fix locked table issue - enable spark tabs when staytuned is enabled - add info for user ecu is tuning piggy back style - add injector limit diagnostic - add injector limit indicator in tuning screen 1.3.6 05/09/2025 - fix issue loading map created in 1.3.3 failed - stayTuned improvement > enabled start diag to be able to see realtime tps/rpm and delta values adjusted in map tuning - stayTuned config screen improvement > enable few other settings 1.3.5 04/30/2025 - Migration update, some change may breaks, do inform our team if any issues. - fix bugs in 1.3.3 (applied to some yamaha models) - StayTuned improvements for more readibility 1.3.4 04/20/2025 Added support for MT25 2020 Added support for MT03 2020 Added support for R25 2020 Added support for R3 2020 1.3.3 04/07/2025 - fix bugs in 1.3.1 (some submenu not shown for certain ecu) 1.3.2 03/20/2025 - Fix issue with old mode returning misc3 unable to read for certain ECU - Removed 10 years Lucky Draw icon - Hide upgradables for stage 1 ECU - Adjustment for StayTuned enabled (showing delta instead of mapping values) - Add ecu region variable check (for permanent stage 1 indo ECU) - Fix UI issue when changing password (password updated, but notification failed to inform user) 1.3.1 03/17/2025 - Added Write and set button for Aux - Updating staytuned status check so that it also disables tuning if staytuned is active - Added o2 Error highlights on AFR for dashboard and diagnostics - Prevent server issue is causing app not able to connect with tuneboss - Prevent server issue is causing app not able to load mode screen - UI Update Radiator fan - no longer show turn on/off temperature for always on/off mode - Default value for PWM cycle time changed to 5s from 10s - Added Min Max value for Rad Fan PWM cycle time - Added Speed number and pin on rankings > view map - Added bike with no support for MAP and IAT 1.3.0 02/28/2025 fix connection issue 1.2.9 01/26/2025 - Fix overflow text for r15 in rankings - Fix Immmobilizer status stays on if device powered off - UI Cleanup - trip detail - UI Cleanup - notification for unsupported file extension share into app - Fix crash when stop button is press during tps calibration - Fix PWM mode not turning off radiator fan if previous setting is set to always on - Added Rad Fan PWM mode's default values 1.2.8 01/19/2025 * Fixed notification message in app not showing after tapping notification 1.2.7 12/27/2024 * Fixed StayTuned not flashing memory issue * Fixed downloaded mapping (stage 2) not applying correct calculation to stage 1 ecu 1.2.6 12/16/2024 * Fixed automatically created mode 2.0 (if no mode file on phone and server) bug creating bad conversion mode * Added a prompt for user if ECU memory is corrupt * ATAS is now available for all ECU with fw 15.3 and above (not just LCv8) * Added import .tbd (datalog) * Added share datalog in view trips 1.2.5 12/08/2024 Fixed Crashing issues on 1.2.3 1.2.4 10/25/2024 - Fix flickering issue on ios viewing mode data - Added a warning for user that still use old mode (end of support in future) - Fixed Offline Mode 2.0 can only be accessed once - Fix some spelling errors - Moved “convert” mode button to legacy mode - Fix mode’s view value for “Spark Degree” (turning smooth shift on adds 128) - Fix display bug on fuel and spark table when viewing value (not displaying correct table correlation) - Fixed issue antilag and rumble settings does not appeared in offline editing - Fixed value of antilag and rumble switch setting is swapped 1.2.3 10/21/2024 - Added Mode 2.0 (file extension .tmox) - Mode2.0(Improvements) - Faster changing between modes - 3.6s max - Mode2.0(Improvements) - Supports uploading up to 3 mode files on server - Mode2.0(Improvements) - Able to view mode file (max 3) on server and delete - Mode2.0(Improvements) - Rework replace/edit, can now delete mode - Mode2.0(Improvements) - Able to view the mode details and edit it - Mode2.0(Improvements) - Able to edit basic and advance config of the mode while not connected to ecu (offline edits) - Mode2.0(Usage) - User can choose to convert from old mode (might not show active state properly), view and edit if required - Mode2.0(Usage) - Once converted to Mode2.0, old mode will be hidden - Mode2.0(Usage) - If user has no mode file (tmo and tmox), both mode menu is selectable - Mode2.0(Usage) - All mode in Mode 2.0 does not write to flash, only setting a mode to default mode will write to flash - Added Rumble/Antilag (new feature available only for FW17.2 and above) - Rumble/Antilag - Turn On/Off, and set values using preset or manual input, theres 10 preset to choose from - Rumble/Antilag - Rumble/Antilag settings will be included in the mode 2.0, not supported for old mode. - AutoConnect - New autoconnect behaviour, autoconnect will keep trying to connect if device is turned off/lost connection every 4 seconds - AutoConnect - Device Disconnected manually will not automatically reconnect, but upon tapping "tap to connect" will attempt connection as normal - Added option to disable immobilizer on connect - Added option to show shiftlight if immobilizer enabled (engine and temp light will turn on when start engine attempted) - Global ECU - Supports global ecu - Multiple Language - Updated few translation 1.2.2 10/13/2024 - Add aux control for gsx n raider (starter) Stage 3 - Check shiftlight too like above - Fix uploading mode returning false error - Fix download mapping for R15M - Added Error legend in diagnostic screen 1.2.1 08/25/2024

TuneBoss ECU version 1.4.4

Updated At: 2026-02-19

Changes: - Added xmax, xmax v2, xmax v3 cross compatibility downloaded mapping - Added modenas and voge manufacturer - Added Avantis for sidestand menu - ShiftBoss - Stage 3 Min RPM - ShiftBoss - Advance QS - move ATAS setting to a new screen - auto connect to default ECU now checks for bluetooth readiness - Add auto connect to default ECU